HiKvision DS-2DF1-718
CathexisVision Camera Integration
Driver:


  Datasheet
Unicast  
Number Of Streams : 2
Format : H264/MJPEG
Audio : Yes
Resolution : 4CIF, 2CIF, 528×384, CIF, QCIF
Multicast  
  Yes (See Limitations)
Motion Detection  
Trigger Zones: 8 Trigger Zones
 Trigger String: STARTMOTION
I/O  
Inputs :  2
Outputs : 2
Settings  
Serial Port : N/A
PTZ Control :  Yes
Cathexis Software : CatVision 2014 Service Pack 1 and later
Camera Firmware : V3.1.6 build 130322
Limitations :

    • A camera Reboot is required in order for certain camera functions to take effect.
    • A typical camera reboot takes between 50-60 seconds.
    • Multicast will work only when the port number is configured to be 8602.
    • Not Supported: Iris Open, Iris Close, Focus Near, Focus Far. 
    • When setting VMD, it is also important to set the “arming schedule” along with ticking “trigger channel” in “Linkage Method”.
    • When setting up streams, the Transport type must always be set to Default.

 

Cathexis Integrations