| Datasheet |
|
| |
| Unicast |
|
| CathexisVision Driver: |
ABUS V2 |
| Number Of Cameras: |
1 |
| Number Of Streams: |
3 |
| Format: |
H264/JPEG |
| Transport: |
Default, RTP/TCP and RTP/UDP |
| Audio: |
Bi-directional |
| Resolution: |
3.1MP (2048×1536), 2.0MP (1920×1080), 1.2MP (1280×960), 0.9MP (1280×720), 4CIF (704×576), VGA (640×480), CIF (352×288) |
| |
|
| Multicast |
|
| Format: |
H264 |
| Audio: |
Listen only |
| Resolution: |
Stream Dependent |
| |
|
| Camera Events |
| Motion Detection |
|
| Zones: |
8 |
| Trigger Message: |
STARTMOTION_Z1 to Z8 (See limitations)
|
| Tamper |
|
| Trigger Message: |
STARTTAMPER |
| I/O |
|
| Inputs: |
7 (See limitations) |
| Outputs: |
2 |
| |
|
| Settings |
|
| Edge Review: |
Not Supported. |
| Serial Port: |
N/A |
| PTZ Control: |
Yes |
| Cathexis Software: |
CathexisVision 2017 SP3 and later |
| Camera Firmware: |
V5.3.0 build 160729 |
| Limitations: |
- Camera doesn’t support Iris Open/Close.
- Focus near/far are reversed in the API.
- The camera reports to CathexisVision that 50fps is supported on the second stream even though it is not, therefore we present this option. Unsupported settings won’t be saved.
- STARTMOTION_Z2 to Z8 can’t be triggered. The camera sends all zone triggers as STARTMOTION_Z1. This may be changed in later camera firmware releases.
- Inputs 2 to 7 can’t be triggered. Camera sends all input triggers as Input 1. This may be changed in later camera firmware releases.
|
| Notes: |
- When using VBR you can also set the Quality and these values are populated directly from the camera. This camera’s values are: 1, 20, 30, 40, 60, 80 and 100. CathexisVision doesn’t alter these settings.
- A high spec server is required to stream 2.0MP and 3.1MP video feeds smoothly at 50FPS.
|
| |
|
