Cisco CIVS-IPC-6400

Datasheet

Unicast
Number Of Cameras:	1
Number Of Streams:	2
Format:	H264/JPEG
Transport:	RTP/TCP and RTP/UDP
Audio:	Audio In
Resolution:	2MP(1920×1080),1.3MP(1536×864), 1.2MP(147×832),0.9MP(1280×720),589kp(1024×576), 522kp(960×544), 331kp(768×432), 281kp(704×400),235kp(640×368),73kp(352×208), 61kp(320×192),21kp(192×112), 15kp(160×96)

Multicast
Format	H264
Audio	Yes
Resolution	Stream Dependent

Camera Events


I/O
Inputs:	1
Outputs:	1

Settings
Edge Review:	Not Supported.
Serial Port:	N/A
PTZ Control:	N/A
Cathexis Software:	CathexisVision 2019 SP1 and later
Camera Firmware:	2.11.0-2 Build 30 Jan 2019
Notes:	ONVIF: Enabled in web interface. Disabled by default. If you want to use JPEG, you have to go to the web interface and enable it. The I/O and audio are not tested. If you want to have the second stream, you need to enable it on the web interface first before adding the camera.
Limitations :	The camera does not support audio out using Onvif. The required Bitrate has to be set in the camera’s web interface.