|
http://www.axis.com/
This camera driver supports older MPEG4 cameras as well as newer H264 Cameras. |
F44 |
CathexisVision Camera Integration |
Driver: |
Datasheet | |
Unicast | |
Number of Cameras : | 4 |
Number Of Streams : | 4 for each camera |
Format : | H264/JPEG |
Audio : | Bi-directional |
Resolution : | 2.0MP (1920×1080), 0.9MP (1280×720), XGA (1024×768), 655kP (1024×640), 480kP (800×600), 409kP (854×480), 400kP (800×500), 360kP (800×450), VGA (640×480), 256kP (640×400), 230kP (640×360), 172kP (480×360), 144kP (480×300) and 129kP (480×270) |
Multicast | |
Format : | H264 |
Resolution : | 2.0MP (1920×1080) |
Audio : | Listen Only |
I/O | |
Inputs : | 4 |
Outputs : | N/A |
Motion Detection | |
Zones : | 9 |
Trigger String: | STARTMOTION_1 to STARTMOTION_9 |
Settings | |
PTZ : | N/A |
Cathexis Software : | CathexisVision 2016 SP2 and later |
Camera Firmware : | 5.65.2 |
License: | A single IP camera license – a camera channel for each one of the internal cameras is still required and is added to the total number of cameras on the site |
Limitations : |
To use cameras 2,3 and 4, you will need to change the “Video Input” in the “Connection tab” of the “Camera Setup”. By default video input is set to 1 but to get to the other camera you will need to change this to the number of the next camera. Eg.
|
Cathexis Integrations |