|
http://This integration supports VideoIQ camera/encoder range
This integration supports VideoIQ camera/encoder range |
VideoIQ iCVR |
CathexisVision Camera Integration |
Driver: |
Datasheet | |
Unicast | |
Number Of Streams : | 2 |
Format : | H264 |
Audio : | Not Supported |
Resolution : | Camera Dependent |
Multicast | |
Supported but untested | |
Motion Detection | |
Trigger String : | The trigger string is composed from the Rule name and the type of activity the user wants to trigger from. Note that in the DSS setup abbreviations of activity types are used. Maximum length of rule name should not exceed 16 characters. Message trigger = ‘Rule Name:Activity’ E.g. If the rule name is ‘Zone 1’ and the trigger activity is a “Scene Change” the message trigger would be “Zone 1:SC “ Rule name :Abbreviation Direction Violated :DV Object Crossed :OC Object Left :OL Object Present :OP Object Not Present :ONP Object Removed :OR Monitored Object Missing :OM Scene Change :SC Too Few :TF Too Many :TM |
Settings | |
PTZ Control : | Yes ,see limitations |
Cathexis Software : | 5042d and later |
Camera Firmware : | Unknown |
Limitations : | Reviewing/Streaming Of footage recorded on the VideoIq unit cannot be accessed from the Cathexis system. When the video input is disconnected a huge volume of p-frames will be received. If this is detected the streams will be stopped. PTZ is not very responsive – there is a delay between the user input and the actual movement. HTTPS settings need to be on “Basic” and NOT “Digest”. |
Cathexis Integrations |