http://www.axis.com/

This camera driver supports older MPEG4 cameras as well as newer H264 Cameras.

Axis P5514
CathexisVision Camera Integration
Driver:


 Datasheet
   
Unicast  
Channels : 1
Number Of Streams : 4
Format : H264/MJPEG
Transport : RTP/UDP and RTP/TCP
Audio : Listen only
Resolution : 0.9MP (1280×720), 360kP (800×450), 129kP (480×270) and 57kP (320×180)
   
Multicast  
Format : H264
Resolution : Stream Dependent
Audio : Listen only
   
Camera Events
  
Detectors : Motion and Audio
Trigger Message : User Defined
   
I/O  
Inputs : Up to 4
Outputs : Up to 4
   
Settings  
Serial Port : N/A
PTZ Control : Yes
Cathexis Software : CatVision 2016 SP2 and later
Camera Firmware : 5.85.1
Limitations :

    • The trigger messages need to be defined in the web interface and TCP port to transmit the trigger message is 32305.
    • If Auto-flip is enabled in the camera’s web interface, then the feed from the camera may freeze intermittently during PTZ control.
    • If the camera’s Inputs and Outputs are changed from the camera’s web interface, they will only be updated in the CathexisVision software when the camera is edited.
Cathexis Integrations