|
Datasheet |
Unicast |
|
Number Of Streams : |
1 |
Format : |
H264, JPEG (Only Supported in CatVision 2014 Service Pack 1 and later) |
Audio : |
No |
Resolution : |
4.1MP |
Video Input 1 : |
Fisheye full 4.1MP resolution |
Video Input 2/3/4/5 : |
Dewarped PTZ views, 640×480 |
Video Input 6/7/8/9 : |
Dewarped PTZ views, 320×240 |
Video Input 10 : |
Fisheye 640×480 |
Video Input 11 : |
180 degree panorama 1 640×240 |
Video Input 12 : |
180 degree panorama 2 640×240 |
Video Input 13 : |
360 degree panorama HD 1280×240 |
Video Input 14 : |
Dewarped PTZ View HD 1280×720 |
Multicast |
|
|
Not Supported |
Motion Detection |
Only Supported in CatVision 2014 Service Pack 1 and later |
Number of Zones: |
8 |
Trigger String: |
STARTMOTION_Z1 to STARTMOTION_Z8 |
Alarms |
|
|
Not Supported |
Settings |
|
Serial Ports : |
Not Supported |
PTZ Control : |
Implemented, but has not been tested. |
Cathexis Software : |
5043a1 and later |
Camera Firmware : |
01.06.07 (0x4D030023) |
Limitations : |
- The view selection is made through the camera input box,
(eg. Setting Camera input to 1, selects the first view)
- Each view is presented as a separate camera/encoder
- The supplier states that the camera can support all 14 views
at the same time, but the framerate delivered will be severely pegged back depending on the amount of camera resources exhausted
- The highest frame rate that the camera can achieve is 12fps.
- The camera frame rates vary depending on how many views are enabled.
Enabling some of the lower resolution streams results in the camera achieving 12fps, but the more resources it uses, the lower the frame rate. The Camera can drop to as little as 1 or 2fps
- The maximum framerate the camera achieves when the 4.1MP stream is active is 3fps.
- The camera uses the alternative RTSP port(8554) and not the standard RTSP port(554)
|