http://www.axis.com/

This camera driver supports older MPEG4 cameras as well as newer H264 Cameras.

Axis Q2901 – E
CathexisVision Camera Integration
Driver:


Datasheet 
Unicast  
Number Of Streams : 4
Format : H264/JPEG 
Transport :  RTP/UDP and RTP/TCP
Audio : Bi-Directional 
Resolution : D1 (720×576), 344kP (672×512), 327 (640×512), VGA (640×480), 172 (480×360), 110kP (384×288), 86kP (336×256), 81 kP(320×256), QVGA (320×240), 43kP (240×180)
   
Multicast  
Format :  H264
Resolution :  Stream Dependent
Audio :  Bi-directional
   
Camera Events  
Zones : Camera Dependent
Trigger Message : User Defined
   
I/O  
Inputs :  2 (See Limitations)
Outputs : 2 (See Limitations)
   
Settings  
Serial Port : N/A
PTZ Control :  N/A
Cathexis Software : CatVision 2016.SP3 and later
Camera Firmware : 5.55.4.1
Limitations :

    • The trigger messages need to be defined on the web interface and TCP port to transmit the trigger message is 32305.
    • Temperature alarms (under/over) are configured in the camera web interface and sent through to CathexisVision as Trigger Messages.
    • I/O are configurable via web interface.
    • The camera can only do up to 9 frames per second.
    • Temperature value is not sent through.

 

Cathexis Integrations