Limitations : |
- The trigger messages need to be defined in the web interface and TCP port to transmit the trigger message is 32305.
- The fourth stream doesn’t come up if the following resolutions are all selected: 8.2MP, 2.0MP, 0.9MP and 360kP
To use cameras 2,3 and 4, you will need to change the “Video Input” in the “Connection tab” of the “Camera Setup”. By default video input is set to 1 but to get to the other camera you will need to change this to the number of the next camera.
Eg.
- Video Input : 1 is camera one
- Video Input : 2 is camera two etc.
|