|
|
https://www.hanwhasecurity.com/
This integration support Samsung HTTP/RTSP based cameras |
|
|
https://www.hanwhasecurity.com/
This integration support Samsung HTTP/RTSP based cameras |
QNO-7030RP |
CathexisVision Camera Integration |
Driver: |
 |
| Datasheet | |
| Unicast | |
| Number Of Streams: | 10 |
| Format: | H264/H265 and JPEG (See limitations) |
| Transport: | RTP/UDP and RTP/TCP |
| Audio: |
Listen only (native) Bi-Directional (2021.2 -ONVIF V2) |
| Resolution: | 3.9MP (2592×1520), 3.6MP (2560×1440), 2.9MP (2304×1296), 2.0MP (1920×1080), 1.2MP (1280×960), 0.9MP (1280×720), XGA (1024×768), 480kP (800×600), D1 (720×576), VGA (640×480), 230kP (640×360) and QVGA (320×240) |
| Multicast | |
| N/A | |
| Camera Events | |
| Motion Detection | |
| Zones: | 1 |
| Trigger Message: |
STARTMOTION |
| Tamper | |
| Trigger Message: | STARTTAMPER and STARTDEFOCUS |
| I/O | |
| Inputs: | 1 |
| Outputs: | 1 |
| Settings | |
| Edge Recording: | Not Supported |
| Serial Port: | N/A |
| PTZ Control: | N/A |
| Cathexis Software: | CathexisVision 2017 SP2 and later |
| Camera Firmware: | 1.00_160607 |
| Limitations: |
|
| Cathexis Integrations |