|
|
http://www.sony.com/
This integration supports the Sony SNC H.264 cameras. The cameras should be updated to the latest firmware version available from Sony before installation. Since the camera range is continually expanding, there is the possibility that new models might require some further modifications to the driver. Please raise any support queries with [email protected] |
SNC-CH280 |
CathexisVision Camera Integration |
Driver: |
 |
| Datasheet | |
| Unicast | |
| Number Of Streams : | 2 |
| Format : | H264/JPEG/MPEG |
| Audio : | Bi-directional |
| Resolution : | 2.0MP (1920×1080), 1.7MP (1680×1056), 1.3MP (1440×912), 1.2MP (1280×960), 1.0MP (1376×768), 0.9MP (1280×720), XGA (1024×768), 589kP (1024×576), 480kP (800×600), 442kP (768×576), D1 (720×576), 4CIF (704×576), 384kP (800×480), D1 (720×480), VGA (640×480), 235kP (640×368), 110kP (384×288), QVGA (320×240) and 61kP (320×192) |
| Multicast | |
| Not Supported | |
| Motion Detection | |
| Trigger Zones: | 4 Trigger Zone |
| Trigger String: | STARTMOTION_1, STARTMOTION_2, STARTMOTION_3, STARTMOTION_4, VMF, AUDIO and TAMPER. |
| I/O | |
| Inputs : | 1 |
| Outputs : | Not Available |
| Settings | |
| Serial Port : | Not Available |
| PTZ Control : | Not Available |
| Cathexis Software : | CatVision 2014 Service Pack 1 and later |
| Camera Firmware : | 1.80.00 |
| Limitations : |
|
| Cathexis Integrations |
