Pelco Spectra HD D5118

Driver:

Datasheet

Unicast

Number Of Streams :

Format :

H264

Audio :

Not Supported

Resolution :

1280 x 960

Multicast

Format :

H264

Resolution :

1280 x 960

Motion Detection

Trigger String :

Motion messages are constructed of the zone name (if present) and the uppercase characters of the anaytic function:
< Zone Name >:< Analytic Event >
eg. If we enable AdaptiveMotion?? and set the Zone name to “Zone 1” the message trigger will be:
“Zone 1:AM”
If the analytic function does not specify a zone name when set up on the camera, ommit . The message trigger for SabotageDetection?? will be:
“SB”
If the message trigger is set to “STARTMOTION”, all message triggers from the camera will trigger the event.
The zone name should NOT be longer than 16 characters.

Settings

PTZ Control :

Yes

Cathexis Software :

5042d1 and later

Camera Firmware :

1.7.8.9310-A1.5288

Limitations :

Due to the complexity of the stream setups, this has to be done by the user via the camera web interface.
Please note that only H.264 streaming is supported.
Refer to Pelco Setup for setup notes.
Need to set up streams on camera web interface.
Please refer to the following page for firmware version 1.9 change notes: Pelco Firmware V1.9

Pelco Camera Integration Guide

File	Action
Pelco Sarix Spectra Camera Integration App-note.pdf	Download