http://www.visec.com/

This integration supports Vista IP cameras.

Vista VK2-1080XVFD3V9F/WCB
CathexisVision Camera Integration
Driver:


  Datasheet
Unicast  
Number Of Streams : 3
Format : H264/MJPEG
Audio : Two-Way
Resolution : 2.0MP (1920×1080), 1.3MP (1280×720), 1.2MP (1280×960), 0.9MP (1280×720), XGA (1024×768), 4CIF (704×576), VGA (640×480) and QVGA (320×240).
Multicast  
Format : H264
Audio :  Two-Way
Resolution :  2MP (1920×1080)
Motion Detection  
Trigger String: STARTMOTION_Z1 to Z8
Zones: 8
I/O  
Input 1 (See limitations) 
Output 1
Settings  
PTZ Control : N/A
Cathexis Software : CatVision 2016 SP2 and later
Camera Firmware : 1.1.9-X2_release
Limitations :  

    • The alarm input is enabled in the web interface by going to the following : Setup > Event > Alarm In, click on enable.
    • Using the onvif driver with this vista camera & firmware version 1.1.9-X2_release the camera stalls randomly. The native Vista driver functions correctly
    • Audio out and outputs are only supported on the Vista V2 driver
   

 

Cathexis Integrations