| Datasheet |
|
| |
| Unicast |
|
| CathexisVision Driver: |
Wisenet (2018.4+) and Samsung V2 (2017.3) |
| Number Of Cameras: |
4 |
| Number Of Streams: |
Up to 10 |
| Format: |
H264/MJPEG |
| Transport: |
Default, RTP/TCP and RTP/UDP |
| Audio: |
N/A |
| Resolution: |
2.0MP (1920×1080), 1.3MP (1280×1024), 1.2MP (1280×960), 0.9MP (1280×720), XGA (1024×768), 480kP (800×600), D1 (720×576), 360kP (800×450), VGA (640×480), 230kP (640×360), QVGA (320×240), 57kP (320×180) |
| |
|
| Multicast |
|
| Format: |
H264 |
| Audio: |
N/A |
| |
|
| Camera Events |
| Motion Detection: |
Yes |
| Zones: |
1 |
| Trigger Message: |
STARTMOTION |
| |
|
| Tamper Detection: |
Yes |
| Trigger Message: |
STARTTAMPER |
| |
|
| Defocus Detection: |
Yes |
| Trigger Message: |
STARTDEFOCUS |
| |
|
| Face Detection: |
Yes |
| Trigger Message: |
STARTFACE |
| |
|
| Video Analytics – Appear: |
Yes |
| Trigger Message: |
VA_APPEAR |
| |
|
| Video Analytics – Loitering: |
Yes |
| Trigger Message: |
VA_LOITERING |
| |
|
| Video Analytics – Enter: |
Yes |
| Trigger Message: |
VA_ENTER |
| |
|
| Video Analytics – Exit: |
Yes |
| Trigger Message: |
VA_EXIT |
| |
|
| Video Analytics – Passing: |
Yes |
| Trigger Message: |
VA_PASS |
| |
|
| Video Analytics – Intrusion |
Yes |
| Trigger Message |
VA_INTRUSION |
| |
|
| Fog Detection |
Yes |
| Trigger Message |
STARTFOG |
| |
|
| I/O |
|
| Inputs: |
Yes. 1 Inputs |
| Outputs: |
Yes. 1 Outputs |
| |
|
| Settings |
|
| Edge Review: |
Yes (2019 SP1++) |
| Serial Port: |
N/A |
| PTZ Control: |
N/A |
| Cathexis Software: |
CathexisVision 2017 SP3 and later |
| Camera Firmware: |
1.01_170904 |
| |
|
| Notes: |
- The format of the first three profiles cannot be changed as it is set on the camera.
- The camera is a Samsung that was changed to Wisenet. On CathexisVision you have to use Samsung Driver if you using 2017.3 and Wisenet Driver if you using 2018.4+
|
| |
|
| Limitations: |
|
| |
|
