http://www.dahuasecurity.com/

Dahua DHI-XVR4104HS

CathexisVision Integration


Datasheet  
 
Unicast  
Number Of Channels: 4
Number Of Streams: 2
Format: H264 and JPEG
Transport: Default, RTP/UDP and RTP/TCP
Audio: Bi-Directional (Please see notes)
Resolution: 552kP (960×576), 4CIF (704×576), 2CIF (704×288), 202kP (352×576), CIF (352×288) and QCIF (176×144)
   
Multicast  
  Not supported
   
Camera Events
Camera triggers on all cameras:
Motion Detection Yes
Zones: 1 Zone per camera
Trigger Message: STARTMOTION, STOPMOTION
Video Loss Yes
Trigger Message: STARTLOSS, STOPLOSS
Tamper Yes
Trigger Message: STARTBLIND, STOPBLIND
Camera triggers on camera 1 only:
No HDD Yes
Trigger Message:

STARTSTORAGENOTEXIST, STOPSTORAGENOTEXIST

HDD Error Yes
Trigger Message:

STARTSTORAGEFAILURE, STOPSTORAGEFAILURE (unable to test STOPSTORAGEFAILURE)

HDD No Space

Yes

Trigger Message:

STARTSTORAGELOWSPACE, STOPSTORAGELOWSPACE

Network Disconnect Yes
Trigger Message: STARTNETABORT, STOPNETABORT (both messages are triggered when the device reconnects)
User Illegal Login Yes
Trigger Message: STARTUSERLOCK, STOPUSERLOCK
   
I/O  
Inputs: N/A
Outputs: N/A
   
Settings  
Edge Recording: N/A
Serial Port: Not supported
PTZ Control: Yes (Please see notes)
Cathexis Software: CathexisVision 2017 SP3 and later
Camera Firmware: 3.218.0000002.1 Build Date: 2017-12-29
Notes:

    • The format of the first video feed is H264 only.
    • Audio in works on first video feed.
    • Audio out works for all camera inputs.
    • CathexisVision lists all of the known camera triggers available in the Dahua API, but the device only supports the triggers listed above.
    • PTZ control must be set up in the device’s web interface and tested from there. When that is done the PTZ control can be enabled in the CathexisVision camera setup and the PTZ channel set to Onboard.

 

integrations.cathexisvideo.com